Journal of Solid and Fluid Mechanics

Author Index

A

Abadi, M. Thermal Response Analysis of Lock-in Thermography Test to Identify the Delamination in Composite Materials [Volume 6, Issue 3, 2016, Pages 119-136]
Abdollahi, H. Design and fabrication of optimized gold micro-heater and comparison of its performance with platinum micro-heater [Volume 6, Issue 1, 2016, Pages 259-272]
Abdollahi far, A. Elasto-plastic time dependent impact analysis of high speed projectile on water surface [Volume 6, Issue 3, 2016, Pages 281-298]
Abdollahi Jahdi, M. H. Shock capturing method by numerical dissipation control on symmetric airfoil [Volume 6, Issue 1, 2016, Pages 285-304]
Abedi, M. Identification of Stiffness and Damping Coefficients of Beams Supports [Volume 6, Issue 1, 2016, Pages 43-60]
Abolbashari, M. H. Design optimization of 2D continuum structures using an efficient simulated annealing algorithm [Volume 6, Issue 4, 2016, Pages 41-48]
Abolbashari, M.H. Simulation, analysis and optimization of airplane wing leading edge structure against bird strike [Volume 6, Issue 3, 2016, Pages 17-32]
Abolghasemi, A. Investigation of springback behavior of fibre-metal laminates using equivalent-layer and separate-layer theories [Volume 6, Issue 4, 2016, Pages 1-9]
Adhami, H. The effect of aspect ratio of model to prtotypein the load acting on cylinderin free surface problems [Volume 6, Issue 4, 2016, Pages 317-328]
Afifi, A. Design and fabrication of optimized gold micro-heater and comparison of its performance with platinum micro-heater [Volume 6, Issue 1, 2016, Pages 259-272]
Afkhami, S. Parametric Analysis of Subsurface Hydrofoil with Boundary Elements Method [Volume 6, Issue 2, 2016, Pages 213-226]
Afsharfard, A. Analytical and Experimental Investigation for Nonlinear Behavior of Flange Joints Under Axial and Lateral Loading [Volume 6, Issue 3, 2016, Pages 43-54]
Aghanajafi, C. The Effect of Non-uniform magnetic field on the fluid flow over a moving and permeable plate with using self-similar method [Volume 6, Issue 2, 2016, Pages 341-349]
Ahmadi, I. Life prediction of reinforced Glass-Epoxy and Graphite-Epoxy polymers subjected to various loading conditions [Volume 6, Issue 1, 2016, Pages 153-165]
Ahmadi Broghani, S. Y. Simulation of Anodic Dissolution in Electrochemical Machining and Tool Design using the Sensitivity Method [Volume 6, Issue 1, 2016, Pages 239-248]
Ahmadi Brooghani, Seyed Y. Multiobjective Optimization Method for Drawbead and Blank-Holder Force Design in Sheet Metal Forming Process [Volume 6, Issue 2, 2016, Pages 167-179]
Ahmadi Sheykh Shabani, G. Thermodynamic Analysis of Feed Water Heating Repowering of Mohammad Montazeri Steam Power Plant [Volume 6, Issue 2, 2016, Pages 311-328]
Ahmadi Vmakani, S. The Effect of Bending Deflection on the Strength Degradation of Homogenous and Hybrid Composites Reinforced with Brittle and Ductile Fibers [Volume 6, Issue 1, 2016, Pages 11-18]
Ahmadkhah, A. Numerical Investigation of Longitudinal and Vertical Positions of Canard on Pressure Distribution and Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model [Volume 6, Issue 4, 2016, Pages 301-316]
Akbari, A. A. Vehicle dynamics improvement using developed robust controller [Volume 6, Issue 4, 2016, Pages 77-90]
Akbari, O. A. Thermodynamic Analysis of Feed Water Heating Repowering of Mohammad Montazeri Steam Power Plant [Volume 6, Issue 2, 2016, Pages 311-328]
Akbarzadeh, P. Fatigue Life Prediction of Adhesive Joints Based on Initial Stiffness and Stiffness Degradation [Volume 6, Issue 3, 2016, Pages 175-183]
Alasty, A. Force and stress analysis of double press machine in use with single-action die press [Volume 6, Issue 1, 2016, Pages 167-177]
Alavi, N. natural convection heat transfer of a nanofluid in a baffle L-Shaped cavity [Volume 6, Issue 3, 2016, Pages 311-321]
Albooyeh, A.R. Numerical analysis of mechanical properties of mesoporous silica and hydroxyapatite-polypropylene nanocomposites [Volume 6, Issue 3, 2016, Pages 229-303]
Alizadeh Vaghslou, Y. Experimental analysis of buckling strength of notched aluminum plates reinforced using fiber metal laminate (FML) patches [Volume 6, Issue 1, 2016, Pages 117-127]
Amanifard, N. Numerical investigation of collecting wire electrode effect on the flow field and heat transfer with electrohydrodynamic actuator [Volume 6, Issue 1, 2016, Pages 201-213]
Amanifard, N. Numerical Investigation of the Effect of Corona Discharge on the Heat Transfer and Pressure Drop over a Single Slot [Volume 6, Issue 4, 2016, Pages 205-221]
Amin Esmaeili, H. Numerical Simulation of free falling Cylinders using Overset Grid Method [Volume 6, Issue 3, 2016, Pages 1-16]
Aminzadeh, M. Analysis the influence of air outlet opening’s location in an industrial environment with high temperature radiant heaters on uniformity of thermal conditions and distribution of the contaminant in presence of asymmetric flow field [Volume 6, Issue 3, 2016, Pages 249-260]
Amirabadi, H. Simulation of Anodic Dissolution in Electrochemical Machining and Tool Design using the Sensitivity Method [Volume 6, Issue 1, 2016, Pages 239-248]
Amiri, Hossein Experimental and Numerical analysis of PEM fuel cell performance with a new helically symmetrical flow channel [Volume 6, Issue 4, 2016, Pages 285-300]
Amoushahi, H. Buckling of Viscoelastic Thick Plates by Finite Strip Method and Higher Order Shear Deformation Theory [Volume 6, Issue 4, 2016, Pages 103-124]
Arab Golarche, A. R. Investigation of flow field and torque coefficient of Darrieus wind turbine with respect to pitch angle variations and tip speed ratios [Volume 6, Issue 4, 2016, Pages 173-191]
Arab Solghar, A. Experimental and Numerical analysis of PEM fuel cell performance with a new helically symmetrical flow channel [Volume 6, Issue 4, 2016, Pages 285-300]
Ariaei, A.R Vibration Analysis of Multiple Parallel Timoshenko Beams with Intermediate Flexible Connections subjected to a Moving Mass [Volume 6, Issue 2, 2016, Pages 69-86]
Arian, M. Smart Fault Diagnosis of Rotating Machine Using Fuzzy Systems and Analysis the Effect of Different Membership Functions [Volume 6, Issue 1, 2016, Pages 85-98]
Arjmand, O. Experimental Analysis of the Strain Effect on the Anisotropic Coefficients of 6061 Aluminum Sheet Using Digital Image Processing [Volume 6, Issue 1, 2016, Pages 73-84]
Armaghani, T. natural convection heat transfer of a nanofluid in a baffle L-Shaped cavity [Volume 6, Issue 3, 2016, Pages 311-321]
Asgari, M. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
Ashenai Ghasemi, F. Experimental analysis of buckling strength of notched aluminum plates reinforced using fiber metal laminate (FML) patches [Volume 6, Issue 1, 2016, Pages 117-127]
Ashraf Talesh, H. Experimental Study and Mathematical Modeling of Deformation of Rectangular Plates under the Impact Load [Volume 6, Issue 1, 2016, Pages 143-152]
Askarishahi, M. Exploring the Effect of Foot Position on Performance of a Modular and Hierarchical Movement Planner in Planning the Sit-to-Stand Transfer [Volume 6, Issue 3, 2016, Pages 109-118]
Ataei, M. Reliability Analysis and Evaluating of Rotary Drilling Machine – Case Study: Mine No.1 of Golgohar Iron Ore Mine [Volume 6, Issue 3, 2016, Pages 185-194]
Ayani, M. Experimental and numerical investigation of blade shape effect on the Hunter wind turbines efficiency [Volume 6, Issue 2, 2016, Pages 329-339]
Azami, M. Electro–Magneto–Thermo-Mechanical Analysis of polymeric Smart Rotating Disk Reinforced WithMultiwalled Carbon Nanotubes with Nonlinear Behavior [Volume 6, Issue 2, 2016, Pages 97-108]
Azarakhsh, S. Experimental and Numerical Investigation of Crushing of Brass Cylindrical Tubes [Volume 6, Issue 2, 2016, Pages 181-196]
Azarakhsh, S. Investigation of Axial and Oblique Crushing of Empty and Foam-Filled Conical Tubes under Clamped Boundary Condition [Volume 6, Issue 4, 2016, Pages 139-159]
Azimian, A. R. Thermodynamic Analysis of Feed Water Heating Repowering of Mohammad Montazeri Steam Power Plant [Volume 6, Issue 2, 2016, Pages 311-328]
Azodi, H. D. Multiobjective Optimization Method for Drawbead and Blank-Holder Force Design in Sheet Metal Forming Process [Volume 6, Issue 2, 2016, Pages 167-179]

B

Babaei, H. Experimental Study and Mathematical Modeling of Deformation of Rectangular Plates under the Impact Load [Volume 6, Issue 1, 2016, Pages 143-152]
Badri, M.A. Numerical Simulation of free falling Cylinders using Overset Grid Method [Volume 6, Issue 3, 2016, Pages 1-16]
Baghani, M. 3D Reconstruction of Carbon Nanotube Composite Using Statistical Correlation Functions [Volume 6, Issue 3, 2016, Pages 33-42]
Bahri, A. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
Bakhsheshy, A. The study of the effects of thermal environment on Free Vibration analysis of two-dimensional Functionally Graded Rectangular plates on Pasternak elastic foundation [Volume 6, Issue 3, 2016, Pages 137-147]
Baniassadi, M. 3D Reconstruction of Carbon Nanotube Composite Using Statistical Correlation Functions [Volume 6, Issue 3, 2016, Pages 33-42]
Bazdidi Tehrani, F. Analysis of mixed convection heat transfer of CuO-water nanofluid in a vertical square duct using two phase Euler-Lagrange approach [Volume 6, Issue 2, 2016, Pages 227-244]
Behjat, Ba. 3-D bending analysis of thick functionally graded plate in different boundary conditions using Element-Free Galerkin (EFG) method [Volume 6, Issue 2, 2016, Pages 109-120]
Behnia, M. بررسی عملکرد فن گریز از مرکز یک توربین سرمایشی با استفاده از شبیه‌سازی عددی [Volume 6, Issue 2, 2016, Pages 245-257]
Biglari, H. Parametric Investigation of Buckling Capacity Improvement of Cracked Columns with Piezoelectric Patches [Volume 6, Issue 3, 2016, Pages 55-64]
Boromand, M. Analysis of Surface Roughness Effects on the Performance of a Gas Turbine Stage [Volume 6, Issue 2, 2016, Pages 197-212]

D

Daneshipour, M. Determination of the diameter ratios for minimum entropy generation in a borehole geothermal heat exchangers using numerical simulation of the flow and heat transfer [Volume 6, Issue 1, 2016, Pages 249-258]
Dashti Rahmatabadi, A. Effects of design and lubrication parameters on thermo-hydrodynamic performance of noncircular three lobe journal bearings with micropolar lubricant [Volume 6, Issue 3, 2016, Pages 79-96]
Dastourani, H. A Numerical Study of Emulsiﬁcation Process in Microﬂuidic Flow-Focusing Devices [Volume 6, Issue 1, 2016, Pages 273-284]
Dastourani, H. Evaluation of Effect of Taper Ratio on Aerodynamic Characteristics of MAVs with Inspired from Insects Wing [Volume 6, Issue 4, 2016, Pages 223-238]
Davari, H. Numerical and Experimental Investigation into Heat Transfer Process in a Fluidized Bed of Alumina Powder [Volume 6, Issue 4, 2016, Pages 263-274]
Djavareshkian, M.H. Evaluation of Effect of Taper Ratio on Aerodynamic Characteristics of MAVs with Inspired from Insects Wing [Volume 6, Issue 4, 2016, Pages 223-238]
Dolati, F. Numerical investigation of collecting wire electrode effect on the flow field and heat transfer with electrohydrodynamic actuator [Volume 6, Issue 1, 2016, Pages 201-213]
Dolati, F. Numerical Investigation of the Effect of Corona Discharge on the Heat Transfer and Pressure Drop over a Single Slot [Volume 6, Issue 4, 2016, Pages 205-221]

E

Ebrahimzadeh Azghadi, F. Evaluate the Performance of the Scalar and Cusp Central Difference Schemes, AUSM+ Upwind Method in Very Low Mach Number up to Supersonic Flow [Volume 6, Issue 1, 2016, Pages 225-237]
Ekrami Jolandan, N. Analysis of mixed convection heat transfer of CuO-water nanofluid in a vertical square duct using two phase Euler-Lagrange approach [Volume 6, Issue 2, 2016, Pages 227-244]
Emam, S. M. Simulation of Anodic Dissolution in Electrochemical Machining and Tool Design using the Sensitivity Method [Volume 6, Issue 1, 2016, Pages 239-248]
Emam, S.M Investigation of rubber formulation by measuring ultrasonic propagation velocity [Volume 6, Issue 2, 2016, Pages 285-294]
Esapour Darzi, M. Effect of increasing number and arrangement of hot fluid tube on melting behavior of Phase Change Material in a triplex tube heat exchanger [Volume 6, Issue 4, 2016, Pages 249-262]
Eshghi, E. Sheet EMF using convex punch instead of concave die [Volume 6, Issue 1, 2016, Pages 29-42]
Eslami Majd, A. A Numerical Study of Emulsiﬁcation Process in Microﬂuidic Flow-Focusing Devices [Volume 6, Issue 1, 2016, Pages 273-284]
Etedali, S. Novel mathematical models based on regression analysis scheme for optimum tuning of TMD parameters [Volume 6, Issue 4, 2016, Pages 59-75]

F

Farhangdoost, Kh. Fatigue Life Prediction of Adhesive Joints Based on Initial Stiffness and Stiffness Degradation [Volume 6, Issue 3, 2016, Pages 175-183]
Farokhipour, A. Analysis of Surface Roughness Effects on the Performance of a Gas Turbine Stage [Volume 6, Issue 2, 2016, Pages 197-212]
Farzin, M. Experimental and Numerical Investigation of Die Filling and Thickness Variation at Two Step Box Copper Tube Hydroforming Die with Movable Bushes [Volume 6, Issue 2, 2016, Pages 87-96]
Fatemi, S. A. Investigation of springback behavior of fibre-metal laminates using equivalent-layer and separate-layer theories [Volume 6, Issue 4, 2016, Pages 1-9]
Fatouraee, N. The alternating magnetic field and convection heat transfer implications for magnetic fluid hyperthermia- A numerical analysis [Volume 6, Issue 1, 2016, Pages 189-200]
Foorginejad, A. Investigation of rubber formulation by measuring ultrasonic propagation velocity [Volume 6, Issue 2, 2016, Pages 285-294]
Foroozande, S. Vibration Analysis of Multiple Parallel Timoshenko Beams with Intermediate Flexible Connections subjected to a Moving Mass [Volume 6, Issue 2, 2016, Pages 69-86]
Forouzani, H. Elasto-plastic time dependent impact analysis of high speed projectile on water surface [Volume 6, Issue 3, 2016, Pages 281-298]

G

Gerdooei, M. Experimental Analysis of the Strain Effect on the Anisotropic Coefficients of 6061 Aluminum Sheet Using Digital Image Processing [Volume 6, Issue 1, 2016, Pages 73-84]
Ghadirian, H. Vibration and stability analysis of laminated composite plates with hygrothermal effect [Volume 6, Issue 2, 2016, Pages 155-166]
Ghadirian, H. The study of the effects of thermal environment on Free Vibration analysis of two-dimensional Functionally Graded Rectangular plates on Pasternak elastic foundation [Volume 6, Issue 3, 2016, Pages 137-147]
Ghaedi, Saeed Influence of active magnetic bearing stiffness on Chaotic vibration of flexible rotor [Volume 6, Issue 2, 2016, Pages 1-16]
Ghamarian, A. Experimental and Numerical Investigation of Crushing of Brass Cylindrical Tubes [Volume 6, Issue 2, 2016, Pages 181-196]
Ghamarian, A. Investigation of Axial and Oblique Crushing of Empty and Foam-Filled Conical Tubes under Clamped Boundary Condition [Volume 6, Issue 4, 2016, Pages 139-159]
Ghayour, M. Influence of active magnetic bearing stiffness on Chaotic vibration of flexible rotor [Volume 6, Issue 2, 2016, Pages 1-16]
Ghayour, M. Dynamic analysis of prestressed Timoshenko beam by using wavelet-based spectral finite element method [Volume 6, Issue 4, 2016, Pages 11-22]
Ghazavi, M. R. Vibration and stability analysis of laminated composite plates with hygrothermal effect [Volume 6, Issue 2, 2016, Pages 155-166]
Ghaznavi, A. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
Gheitagh, A. M. Thermal Performance Modeling of Liquid in Evaporator with Spherical Microstructures and Conical Micropillars [Volume 6, Issue 4, 2016, Pages 193-204]
Ghiasi, M. Reliability Analysis and Evaluating of Rotary Drilling Machine – Case Study: Mine No.1 of Golgohar Iron Ore Mine [Volume 6, Issue 3, 2016, Pages 185-194]
Gholamian, E. Numerical Analysis of Various Nanoparticles Size Effects on Thermal Performance of Nanofluid in A Microchannel Heat Sink [Volume 6, Issue 4, 2016, Pages 275-284]
Ghorbanianfard, P. Experimental and numerical investigation of blade shape effect on the Hunter wind turbines efficiency [Volume 6, Issue 2, 2016, Pages 329-339]
Ghorbani Menghari, H. Experimental and Numerical Investigation of Die Filling and Thickness Variation at Two Step Box Copper Tube Hydroforming Die with Movable Bushes [Volume 6, Issue 2, 2016, Pages 87-96]
Goharimanesh, M. Vehicle dynamics improvement using developed robust controller [Volume 6, Issue 4, 2016, Pages 77-90]
Golabi, S. Optimization of Bearing Location for Multi-Stepped Rotor by Genetic Algorithm [Volume 6, Issue 1, 2016, Pages 99-106]
Golparvar, H. Aeroelastic nonlinear analysis of a high aspect ratio wing with store flow steady incompressible [Volume 6, Issue 2, 2016, Pages 259-269]
Gorji, A. Experimental and Numerical Investigation of Die Filling and Thickness Variation at Two Step Box Copper Tube Hydroforming Die with Movable Bushes [Volume 6, Issue 2, 2016, Pages 87-96]

H

Habibi, N. Numerical Investigation of the Effect of Corona Discharge on the Heat Transfer and Pressure Drop over a Single Slot [Volume 6, Issue 4, 2016, Pages 205-221]
Haddadi, A. Investigation of rubber formulation by measuring ultrasonic propagation velocity [Volume 6, Issue 2, 2016, Pages 285-294]
Hadian Jazi, Sh. Smart Fault Diagnosis of Rotating Machine Using Fuzzy Systems and Analysis the Effect of Different Membership Functions [Volume 6, Issue 1, 2016, Pages 85-98]
Hadian Jazi, Sh. Exploring the Effect of Foot Position on Performance of a Modular and Hierarchical Movement Planner in Planning the Sit-to-Stand Transfer [Volume 6, Issue 3, 2016, Pages 109-118]
Haghighi Khoshkhoo, R. Optimization of Shazand Arak power plant boiler rifled tubes using genetic algorithm [Volume 6, Issue 3, 2016, Pages 227-237]
Hamedi, M. H. The alternating magnetic field and convection heat transfer implications for magnetic fluid hyperthermia- A numerical analysis [Volume 6, Issue 1, 2016, Pages 189-200]
Hanafizadeh, P. Using net present value as a single objective function for thermo-economic optimization of a plate-fin recuperator in microturbine [Volume 6, Issue 3, 2016, Pages 213-226]
Hasanvand, M. An analysis of stresses evaluation efficacy in adhesive single-lap joints [Volume 6, Issue 4, 2016, Pages 49-58]
Hashemabadi, M. Design and Numerical Investigation of a Small Scale Solar Chimney Using Computational Fluid Dynamics [Volume 6, Issue 3, 2016, Pages 271-280]
Hematiyan, M. R. Natural Frequency Optimization of 2D and 3D Truss Structures Using a Discrete Sensitivity Analysis [Volume 6, Issue 4, 2016, Pages 23-40]
Hematiyan, M.R Identification of Stiffness and Damping Coefficients of Beams Supports [Volume 6, Issue 1, 2016, Pages 43-60]
Hosseini-Hashemi, S. Investigating simultaneous effects of tensile-compressive and shear moduli of van der Waals interactions on the vibration of bilayer graphene nanoribbons for different boundary condition [Volume 6, Issue 2, 2016, Pages 295-310]
Hosseini Kahsari, S. M. J. Effect of increasing number and arrangement of hot fluid tube on melting behavior of Phase Change Material in a triplex tube heat exchanger [Volume 6, Issue 4, 2016, Pages 249-262]
Hosseini Kordkheili, S. A. Experimental investigation of vibrational-damping properties of a viscoelastic material [Volume 6, Issue 4, 2016, Pages 161-171]
Hosseinipour, S.J. GTN Damage Model Parameters for Ductile Fracture Simulation in Aluminum Alloy 5083-O [Volume 6, Issue 1, 2016, Pages 129-142]

I

Imani Nejad, Z. Influence of air inlet diffuser layout on indoor air quality and occupants’ thermal comfort in a room with baseboard heating system [Volume 6, Issue 3, 2016, Pages 261-270]
Irani Rahagi, M. Optimization of Bearing Location for Multi-Stepped Rotor by Genetic Algorithm [Volume 6, Issue 1, 2016, Pages 99-106]
Izadpanah, E. natural convection heat transfer of a nanofluid in a baffle L-Shaped cavity [Volume 6, Issue 3, 2016, Pages 311-321]
Izadpanah, S. Experimental Analysis of the Strain Effect on the Anisotropic Coefficients of 6061 Aluminum Sheet Using Digital Image Processing [Volume 6, Issue 1, 2016, Pages 73-84]

J

Jafari, A. A. Effect of welding residual stress on natural frequencies using experimental and numerical analysis [Volume 6, Issue 4, 2016, Pages 91-101]
Jafari, M. Evaluation of optimal parameters affecting of isotropic plates with polygonal cutout under shear load using particle swarm algorithm [Volume 6, Issue 2, 2016, Pages 29-40]
Jahannama, M. R. A Numerical Study of Emulsiﬁcation Process in Microﬂuidic Flow-Focusing Devices [Volume 6, Issue 1, 2016, Pages 273-284]
Jalali Aghchai, A. Investigation of springback behavior of fibre-metal laminates using equivalent-layer and separate-layer theories [Volume 6, Issue 4, 2016, Pages 1-9]
Jalali Aghchai, Abdolhossein Investigation of the effects of geometric parameters of layers on the formability of Aluminum/Polyurethane/Aluminum sandwich sheets [Volume 6, Issue 1, 2016, Pages 61-71]
Jamali, A. Experimental Study and Mathematical Modeling of Deformation of Rectangular Plates under the Impact Load [Volume 6, Issue 1, 2016, Pages 143-152]
Jamshidi Aval, H. GTN Damage Model Parameters for Ductile Fracture Simulation in Aluminum Alloy 5083-O [Volume 6, Issue 1, 2016, Pages 129-142]
Javaherdeh, K. Parametric analysis and optimization of a ground source heat pump with economizer [Volume 6, Issue 1, 2016, Pages 215-224]
Javid, M. Parametric Investigation of Buckling Capacity Improvement of Cracked Columns with Piezoelectric Patches [Volume 6, Issue 3, 2016, Pages 55-64]

K

Kadkhodayan, M. Sheet EMF using convex punch instead of concave die [Volume 6, Issue 1, 2016, Pages 29-42]
Kahhal, P. Multiobjective Optimization Method for Drawbead and Blank-Holder Force Design in Sheet Metal Forming Process [Volume 6, Issue 2, 2016, Pages 167-179]
Kahrom, M. Experimental and numerical investigation of blade shape effect on the Hunter wind turbines efficiency [Volume 6, Issue 2, 2016, Pages 329-339]
Kamali, K. Investigating simultaneous effects of tensile-compressive and shear moduli of van der Waals interactions on the vibration of bilayer graphene nanoribbons for different boundary condition [Volume 6, Issue 2, 2016, Pages 295-310]
Kamali, R. Elasto-plastic time dependent impact analysis of high speed projectile on water surface [Volume 6, Issue 3, 2016, Pages 281-298]
Karimipour, Arash A New Models For Dynamic Viscosity of a MWCNTs-EG Nanofluid [Volume 6, Issue 1, 2016, Pages 179-188]
Kasaeipoor, A. forced convective heat transfer of cu-water nanofluid over a constant surface temperature wedge [Volume 6, Issue 4, 2016, Pages 343-353]
Kazemi, Z. Natural Frequency Optimization of 2D and 3D Truss Structures Using a Discrete Sensitivity Analysis [Volume 6, Issue 4, 2016, Pages 23-40]
Kermani, M. J. Analysis of Surface Roughness Effects on the Performance of a Gas Turbine Stage [Volume 6, Issue 2, 2016, Pages 197-212]
Keshtegar, B. Novel mathematical models based on regression analysis scheme for optimum tuning of TMD parameters [Volume 6, Issue 4, 2016, Pages 59-75]
Khalili, A. Thermal Performance Modeling of Liquid in Evaporator with Spherical Microstructures and Conical Micropillars [Volume 6, Issue 4, 2016, Pages 193-204]
Khalili, S. M. R. Bending analysis of sandwich and laminated composite plates containing piezoelectric layers by improved global-local theory [Volume 6, Issue 2, 2016, Pages 121-137]
Khanmohammadi, M. Life prediction of reinforced Glass-Epoxy and Graphite-Epoxy polymers subjected to various loading conditions [Volume 6, Issue 1, 2016, Pages 153-165]
Khodarahmi, H. Investigation of Axial and Oblique Crushing of Empty and Foam-Filled Conical Tubes under Clamped Boundary Condition [Volume 6, Issue 4, 2016, Pages 139-159]
Khorasani, R. Experimental investigation of vibrational-damping properties of a viscoelastic material [Volume 6, Issue 4, 2016, Pages 161-171]
Khorshidi, J. Numerical and Experimental Investigation into Heat Transfer Process in a Fluidized Bed of Alumina Powder [Volume 6, Issue 4, 2016, Pages 263-274]
Khorshidi, K. Vibration and stability analysis of laminated composite plates with hygrothermal effect [Volume 6, Issue 2, 2016, Pages 155-166]
Khorshidi, K. The study of the effects of thermal environment on Free Vibration analysis of two-dimensional Functionally Graded Rectangular plates on Pasternak elastic foundation [Volume 6, Issue 3, 2016, Pages 137-147]
Khorshidi, K. Exact free vibration analysis of sector plates coupled with piezoelectric layers using first-order shear deformation plate theory [Volume 6, Issue 4, 2016, Pages 125-138]
Khoshkhoo, R.H. Calculation of Stiffness and Stresses Due to Misalignment in Multiple Diaphragm Couplings Using Analytical Method [Volume 6, Issue 2, 2016, Pages 139-154]
Khoshnood, A. M L1 adaptive controller design of a space system considering structural flexibility [Volume 6, Issue 2, 2016, Pages 17-27]
Khosravi, H. Experimental Analysis of the Strain Effect on the Anisotropic Coefficients of 6061 Aluminum Sheet Using Digital Image Processing [Volume 6, Issue 1, 2016, Pages 73-84]

L

Lari, H.R. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
Lexian, H. Calculation of Stiffness and Stresses Due to Misalignment in Multiple Diaphragm Couplings Using Analytical Method [Volume 6, Issue 2, 2016, Pages 139-154]
Loghman, A. Electro–Magneto–Thermo-Mechanical Analysis of polymeric Smart Rotating Disk Reinforced WithMultiwalled Carbon Nanotubes with Nonlinear Behavior [Volume 6, Issue 2, 2016, Pages 97-108]
Lotf Khodaei, B. Design optimization of 2D continuum structures using an efficient simulated annealing algorithm [Volume 6, Issue 4, 2016, Pages 41-48]

M

Maerefat, M. Influence of air inlet diffuser layout on indoor air quality and occupants’ thermal comfort in a room with baseboard heating system [Volume 6, Issue 3, 2016, Pages 261-270]
Maghrebi, M. j. Investigation of flow field and torque coefficient of Darrieus wind turbine with respect to pitch angle variations and tip speed ratios [Volume 6, Issue 4, 2016, Pages 173-191]
Maghrebi, M. J. Performance improvement of hybrid Darrieus-Savonius wind turbine [Volume 6, Issue 3, 2016, Pages 195-212]
Maghsoudi, P. Using net present value as a single objective function for thermo-economic optimization of a plate-fin recuperator in microturbine [Volume 6, Issue 3, 2016, Pages 213-226]
Mahdavi, M. 3D Reconstruction of Carbon Nanotube Composite Using Statistical Correlation Functions [Volume 6, Issue 3, 2016, Pages 33-42]
Mahmodzade Hoseyni, S.A. Evaluation of optimal parameters affecting of isotropic plates with polygonal cutout under shear load using particle swarm algorithm [Volume 6, Issue 2, 2016, Pages 29-40]
Mahmoodi, A. Optimization of Shazand Arak power plant boiler rifled tubes using genetic algorithm [Volume 6, Issue 3, 2016, Pages 227-237]
Mahpeykar, M. R. Evaluate the Performance of the Scalar and Cusp Central Difference Schemes, AUSM+ Upwind Method in Very Low Mach Number up to Supersonic Flow [Volume 6, Issue 1, 2016, Pages 225-237]
Majidi Rod, A. H. Effect of welding residual stress on natural frequencies using experimental and numerical analysis [Volume 6, Issue 4, 2016, Pages 91-101]
Meisami, F. Analytical and Experimental Investigation for Nonlinear Behavior of Flange Joints Under Axial and Lateral Loading [Volume 6, Issue 3, 2016, Pages 43-54]
Mesforoosh, H. Optimization of Bearing Location for Multi-Stepped Rotor by Genetic Algorithm [Volume 6, Issue 1, 2016, Pages 99-106]
Mikaeeli, S. 3-D bending analysis of thick functionally graded plate in different boundary conditions using Element-Free Galerkin (EFG) method [Volume 6, Issue 2, 2016, Pages 109-120]
Mirdamadi, H. R. Dynamic analysis of prestressed Timoshenko beam by using wavelet-based spectral finite element method [Volume 6, Issue 4, 2016, Pages 11-22]
Mirsalim, S. M. Investigation of the effect of air intake pressure and fuel injection parameters on upgrading power and emissions of heavy duty diesel engine [Volume 6, Issue 4, 2016, Pages 239-247]
Mirsalim, S. M. Investigation of the effect of air intake pressure and fuel injection parameters on upgrading power and emissions of heavy duty diesel engine [Volume 6, Issue 4, 2016, Pages 239-247]
Mirzababaie Mostofi, T. Experimental Study and Mathematical Modeling of Deformation of Rectangular Plates under the Impact Load [Volume 6, Issue 1, 2016, Pages 143-152]
Moavenian, M. Analytical and Experimental Investigation for Nonlinear Behavior of Flange Joints Under Axial and Lateral Loading [Volume 6, Issue 3, 2016, Pages 43-54]
Moeenfard, H. Modeling piezoelectric based energy harvesters under random base excitation [Volume 6, Issue 1, 2016, Pages 1-10]
Moghimi, I. Force and stress analysis of double press machine in use with single-action die press [Volume 6, Issue 1, 2016, Pages 167-177]
Mohaddes Deylami, H. Numerical investigation of collecting wire electrode effect on the flow field and heat transfer with electrohydrodynamic actuator [Volume 6, Issue 1, 2016, Pages 201-213]
Mohaddes Deylami, H. Numerical Investigation of the Effect of Corona Discharge on the Heat Transfer and Pressure Drop over a Single Slot [Volume 6, Issue 4, 2016, Pages 205-221]
Mohammad Hosseini Mirzaei, M. Numerical study of side fixture and feed rate method for decrease of force imposed by spindle of machine on the incremental forming groove test [Volume 6, Issue 2, 2016, Pages 61-67]
Mohammadi, S. Reliability Analysis and Evaluating of Rotary Drilling Machine – Case Study: Mine No.1 of Golgohar Iron Ore Mine [Volume 6, Issue 3, 2016, Pages 185-194]
Mohammadi Hooyeh, H. Primary creep analysis of nanocomposite thick-walled sphere under thermal, magnetic and mechanical loading using viscoelastic Bergurs model [Volume 6, Issue 3, 2016, Pages 163-174]
Mohammad Khanlo, Heshmatallah Influence of active magnetic bearing stiffness on Chaotic vibration of flexible rotor [Volume 6, Issue 2, 2016, Pages 1-16]
Mokhtari, A. Dynamic analysis of prestressed Timoshenko beam by using wavelet-based spectral finite element method [Volume 6, Issue 4, 2016, Pages 11-22]
Mokhtari, H. Optimization of Shazand Arak power plant boiler rifled tubes using genetic algorithm [Volume 6, Issue 3, 2016, Pages 227-237]
Moradi-Maryamnegari, H. L1 adaptive controller design of a space system considering structural flexibility [Volume 6, Issue 2, 2016, Pages 17-27]
Moradkhani, B. Investigation of springback behavior of fibre-metal laminates using equivalent-layer and separate-layer theories [Volume 6, Issue 4, 2016, Pages 1-9]
Motaharifard, O. Aeroelastic nonlinear analysis of a high aspect ratio wing with store flow steady incompressible [Volume 6, Issue 2, 2016, Pages 259-269]
Mousavi, S. M. Numerical Analysis of Various Nanoparticles Size Effects on Thermal Performance of Nanofluid in A Microchannel Heat Sink [Volume 6, Issue 4, 2016, Pages 275-284]
Mozaffari, A. Non-linear finite element low-velocity impact response analysis of a viscoelastic composite plate, employing a layerwise theory [Volume 6, Issue 3, 2016, Pages 97-108]

N

Naddaf Oskouei, A. Primary creep analysis of nanocomposite thick-walled sphere under thermal, magnetic and mechanical loading using viscoelastic Bergurs model [Volume 6, Issue 3, 2016, Pages 163-174]
Nakhaee, M. Experimental and numerical investigation of blade shape effect on the Hunter wind turbines efficiency [Volume 6, Issue 2, 2016, Pages 329-339]
Nazemnezhad, R. Investigating simultaneous effects of tensile-compressive and shear moduli of van der Waals interactions on the vibration of bilayer graphene nanoribbons for different boundary condition [Volume 6, Issue 2, 2016, Pages 295-310]
Nili-Ahmadabadi, M. بررسی عملکرد فن گریز از مرکز یک توربین سرمایشی با استفاده از شبیه‌سازی عددی [Volume 6, Issue 2, 2016, Pages 245-257]
Norozi, M. Parametric Analysis of Subsurface Hydrofoil with Boundary Elements Method [Volume 6, Issue 2, 2016, Pages 213-226]
Nosraty, H. The Effect of Bending Deflection on the Strength Degradation of Homogenous and Hybrid Composites Reinforced with Brittle and Ductile Fibers [Volume 6, Issue 1, 2016, Pages 11-18]

O

Onsorynezhad, S. Exact free vibration analysis of sector plates coupled with piezoelectric layers using first-order shear deformation plate theory [Volume 6, Issue 4, 2016, Pages 125-138]
Otadolajam, P. A New Adaptive Fuzzy Integral Sliding Mode Controller Design for Electrically Driven Nonholonomic Wheeled Mobile Robots [Volume 6, Issue 2, 2016, Pages 41-59]

P

Pachenari, M.H. Non-linear finite element low-velocity impact response analysis of a viscoelastic composite plate, employing a layerwise theory [Volume 6, Issue 3, 2016, Pages 97-108]
Pahamli, Y. Effect of increasing number and arrangement of hot fluid tube on melting behavior of Phase Change Material in a triplex tube heat exchanger [Volume 6, Issue 4, 2016, Pages 249-262]
Pahange, H. Simulation, analysis and optimization of airplane wing leading edge structure against bird strike [Volume 6, Issue 3, 2016, Pages 17-32]
Pasandidehfard, M. Evaluate the Performance of the Scalar and Cusp Central Difference Schemes, AUSM+ Upwind Method in Very Low Mach Number up to Supersonic Flow [Volume 6, Issue 1, 2016, Pages 225-237]
Pasandideh-Fard, M. Parametric Analysis of Subsurface Hydrofoil with Boundary Elements Method [Volume 6, Issue 2, 2016, Pages 213-226]
Pasdar Shahri, H. Influence of air inlet diffuser layout on indoor air quality and occupants’ thermal comfort in a room with baseboard heating system [Volume 6, Issue 3, 2016, Pages 261-270]
Payganeh, Gh. Investigation of the effects of geometric parameters of layers on the formability of Aluminum/Polyurethane/Aluminum sandwich sheets [Volume 6, Issue 1, 2016, Pages 61-71]
Permeh, M. GTN Damage Model Parameters for Ductile Fracture Simulation in Aluminum Alloy 5083-O [Volume 6, Issue 1, 2016, Pages 129-142]
Pirkandi, J. Design and Numerical Investigation of a Small Scale Solar Chimney Using Computational Fluid Dynamics [Volume 6, Issue 3, 2016, Pages 271-280]
Pishbin, S.I. Analytical and Experimental Investigation for Nonlinear Behavior of Flange Joints Under Axial and Lateral Loading [Volume 6, Issue 3, 2016, Pages 43-54]
Pourkamali Anaraki, A. Experimental analysis of buckling strength of notched aluminum plates reinforced using fiber metal laminate (FML) patches [Volume 6, Issue 1, 2016, Pages 117-127]
Pourmahommd, N. The effect of aspect ratio of model to prtotypein the load acting on cylinderin free surface problems [Volume 6, Issue 4, 2016, Pages 317-328]
Poursadeghfard, M. Numerical and Experimental Investigation into Heat Transfer Process in a Fluidized Bed of Alumina Powder [Volume 6, Issue 4, 2016, Pages 263-274]
Pourzamani, E. Reliability Analysis and Evaluating of Rotary Drilling Machine – Case Study: Mine No.1 of Golgohar Iron Ore Mine [Volume 6, Issue 3, 2016, Pages 185-194]

R

Rafee, R. Determination of the diameter ratios for minimum entropy generation in a borehole geothermal heat exchangers using numerical simulation of the flow and heat transfer [Volume 6, Issue 1, 2016, Pages 249-258]
Rahi, A. Experimental and Numerical Investigation of Crushing of Brass Cylindrical Tubes [Volume 6, Issue 2, 2016, Pages 181-196]
Rahmani, P. Experimental analysis of buckling strength of notched aluminum plates reinforced using fiber metal laminate (FML) patches [Volume 6, Issue 1, 2016, Pages 117-127]
Raisi, A. forced convective heat transfer of cu-water nanofluid over a constant surface temperature wedge [Volume 6, Issue 4, 2016, Pages 343-353]
Rajabi, I. Bending analysis of sandwich and laminated composite plates containing piezoelectric layers by improved global-local theory [Volume 6, Issue 2, 2016, Pages 121-137]
Rajabi Eslami, M. Frequency Analysis of Vortex Shedding in Cascade of an Axial Compressor in Moderate Reynolds Numbers [Volume 6, Issue 1, 2016, Pages 19-27]
Ramezanizadeh, Mahdi Numerical Investigation of Longitudinal and Vertical Positions of Canard on Pressure Distribution and Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model [Volume 6, Issue 4, 2016, Pages 301-316]
Ramyar, M. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
Ranjbar, A. Effect of increasing number and arrangement of hot fluid tube on melting behavior of Phase Change Material in a triplex tube heat exchanger [Volume 6, Issue 4, 2016, Pages 249-262]
Rashidi Meybodi, Reza Effects of design and lubrication parameters on thermo-hydrodynamic performance of noncircular three lobe journal bearings with micropolar lubricant [Volume 6, Issue 3, 2016, Pages 79-96]
Rashidzade, M. The effect of aspect ratio of model to prtotypein the load acting on cylinderin free surface problems [Volume 6, Issue 4, 2016, Pages 317-328]
Rasoolizadeh Shooroki, A. Effects of design and lubrication parameters on thermo-hydrodynamic performance of noncircular three lobe journal bearings with micropolar lubricant [Volume 6, Issue 3, 2016, Pages 79-96]
Rezaei Ashtiani, H. Predication of roll force and roll torque in hot strip rolling process using artificial neural networks and finite element method [Volume 6, Issue 3, 2016, Pages 149-162]
Rezazadeh, Niki Numerical Simulation of the Controlled Fluid Flow Around the Cylinder Using Compound Actuators [Volume 6, Issue 3, 2016, Pages 239-247]
Roshan, A. Performance improvement of hybrid Darrieus-Savonius wind turbine [Volume 6, Issue 3, 2016, Pages 195-212]
Roshanian, J. L1 adaptive controller design of a space system considering structural flexibility [Volume 6, Issue 2, 2016, Pages 17-27]

S

Sadat, A. Experimental and Numerical Investigation of Die Filling and Thickness Variation at Two Step Box Copper Tube Hydroforming Die with Movable Bushes [Volume 6, Issue 2, 2016, Pages 87-96]
Saedodin, S. A New Models For Dynamic Viscosity of a MWCNTs-EG Nanofluid [Volume 6, Issue 1, 2016, Pages 179-188]
Saeedi, A. The Effect of Non-uniform magnetic field on the fluid flow over a moving and permeable plate with using self-similar method [Volume 6, Issue 2, 2016, Pages 341-349]
Saeidi, A. Finite element modeling of debonding behavior of the adhesively bonded joints between sandwich panel and pultruded profile in flexural loading [Volume 6, Issue 1, 2016, Pages 107-116]
Safari Chaykandi, J. Thermal Response Analysis of Lock-in Thermography Test to Identify the Delamination in Composite Materials [Volume 6, Issue 3, 2016, Pages 119-136]
Safarzadeh, H. Applying fuzzy logic to optimize the performance of solar air heater with installation of air barriers in cross channel [Volume 6, Issue 4, 2016, Pages 329-341]
Safavi, K. Force and stress analysis of double press machine in use with single-action die press [Volume 6, Issue 1, 2016, Pages 167-177]
Safavinejad, A. Analysis the influence of air outlet opening’s location in an industrial environment with high temperature radiant heaters on uniformity of thermal conditions and distribution of the contaminant in presence of asymmetric flow field [Volume 6, Issue 3, 2016, Pages 249-260]
Saffari, H. Thermal Performance Modeling of Liquid in Evaporator with Spherical Microstructures and Conical Micropillars [Volume 6, Issue 4, 2016, Pages 193-204]
Saghafian, M. بررسی عملکرد فن گریز از مرکز یک توربین سرمایشی با استفاده از شبیه‌سازی عددی [Volume 6, Issue 2, 2016, Pages 245-257]
Saghafian, M. Numerical Simulation of free falling Cylinders using Overset Grid Method [Volume 6, Issue 3, 2016, Pages 1-16]
Sagharichi, A. Investigation of flow field and torque coefficient of Darrieus wind turbine with respect to pitch angle variations and tip speed ratios [Volume 6, Issue 4, 2016, Pages 173-191]
Salarieh, H. Force and stress analysis of double press machine in use with single-action die press [Volume 6, Issue 1, 2016, Pages 167-177]
Samaeifar, F. Design and fabrication of optimized gold micro-heater and comparison of its performance with platinum micro-heater [Volume 6, Issue 1, 2016, Pages 259-272]
Sarafrazi, V. Analysis and modeling of aerodynamic pressure wave due to high-speed trains passage [Volume 6, Issue 3, 2016, Pages 65-78]
Saranjam, B. Elasto-plastic time dependent impact analysis of high speed projectile on water surface [Volume 6, Issue 3, 2016, Pages 281-298]
Sarvi Ghiasabadi, O. Identification of Stiffness and Damping Coefficients of Beams Supports [Volume 6, Issue 1, 2016, Pages 43-60]
Sayah Badkhor, M. Primary creep analysis of nanocomposite thick-walled sphere under thermal, magnetic and mechanical loading using viscoelastic Bergurs model [Volume 6, Issue 3, 2016, Pages 163-174]
Sedaghatnejad, M. Analysis of mixed convection heat transfer of CuO-water nanofluid in a vertical square duct using two phase Euler-Lagrange approach [Volume 6, Issue 2, 2016, Pages 227-244]
Shams Taleghani, A. Numerical Study of Shock-Boundary Layer Interaction on an Airfoil with Cavity and Porous Surface: Parametric Investigation in a Transonic Flow [Volume 6, Issue 2, 2016, Pages 271-284]
Sharafi, A. Numerical Investigation of Longitudinal and Vertical Positions of Canard on Pressure Distribution and Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model [Volume 6, Issue 4, 2016, Pages 301-316]
Shariyat, M. Bending analysis of sandwich and laminated composite plates containing piezoelectric layers by improved global-local theory [Volume 6, Issue 2, 2016, Pages 121-137]
Shariyat, M. Non-linear finite element low-velocity impact response analysis of a viscoelastic composite plate, employing a layerwise theory [Volume 6, Issue 3, 2016, Pages 97-108]
Sheibani, A. L1 adaptive controller design of a space system considering structural flexibility [Volume 6, Issue 2, 2016, Pages 17-27]
Shishesaz, M. An analysis of stresses evaluation efficacy in adhesive single-lap joints [Volume 6, Issue 4, 2016, Pages 49-58]
Shiva, M. Investigation of rubber formulation by measuring ultrasonic propagation velocity [Volume 6, Issue 2, 2016, Pages 285-294]
Shojaeefard, M.H. Frequency Analysis of Vortex Shedding in Cascade of an Axial Compressor in Moderate Reynolds Numbers [Volume 6, Issue 1, 2016, Pages 19-27]
Shokrollahi, S. Aeroelastic nonlinear analysis of a high aspect ratio wing with store flow steady incompressible [Volume 6, Issue 2, 2016, Pages 259-269]
Soltani, B. Numerical study of side fixture and feed rate method for decrease of force imposed by spindle of machine on the incremental forming groove test [Volume 6, Issue 2, 2016, Pages 61-67]
Soltanpour, M.R. A New Adaptive Fuzzy Integral Sliding Mode Controller Design for Electrically Driven Nonholonomic Wheeled Mobile Robots [Volume 6, Issue 2, 2016, Pages 41-59]

T

Taghavi Fadaki1, S. Numerical investigation of collecting wire electrode effect on the flow field and heat transfer with electrohydrodynamic actuator [Volume 6, Issue 1, 2016, Pages 201-213]
Taheri, M. Investigation of rubber formulation by measuring ultrasonic propagation velocity [Volume 6, Issue 2, 2016, Pages 285-294]
Tajik, M. Investigation of the effects of geometric parameters of layers on the formability of Aluminum/Polyurethane/Aluminum sandwich sheets [Volume 6, Issue 1, 2016, Pages 61-71]
Talaee, M. Analysis and modeling of aerodynamic pressure wave due to high-speed trains passage [Volume 6, Issue 3, 2016, Pages 65-78]
Tehrani, M. The Effect of Bending Deflection on the Strength Degradation of Homogenous and Hybrid Composites Reinforced with Brittle and Ductile Fibers [Volume 6, Issue 1, 2016, Pages 11-18]
Toghraie, D. Thermodynamic Analysis of Feed Water Heating Repowering of Mohammad Montazeri Steam Power Plant [Volume 6, Issue 2, 2016, Pages 311-328]
Tourang, H. Electro–Magneto–Thermo-Mechanical Analysis of polymeric Smart Rotating Disk Reinforced WithMultiwalled Carbon Nanotubes with Nonlinear Behavior [Volume 6, Issue 2, 2016, Pages 97-108]

V

Vasefi, Seyed I. Analysis of mixed convection heat transfer of CuO-water nanofluid in a vertical square duct using two phase Euler-Lagrange approach [Volume 6, Issue 2, 2016, Pages 227-244]

Y

Yadegari, M. Shock capturing method by numerical dissipation control on symmetric airfoil [Volume 6, Issue 1, 2016, Pages 285-304]
Yadegari, M. Numerical Study of Shock-Boundary Layer Interaction on an Airfoil with Cavity and Porous Surface: Parametric Investigation in a Transonic Flow [Volume 6, Issue 2, 2016, Pages 271-284]
Yaghooti, B. Force and stress analysis of double press machine in use with single-action die press [Volume 6, Issue 1, 2016, Pages 167-177]
Yari, Sh. Applying fuzzy logic to optimize the performance of solar air heater with installation of air barriers in cross channel [Volume 6, Issue 4, 2016, Pages 329-341]

Z

Zakariapour, M. The alternating magnetic field and convection heat transfer implications for magnetic fluid hyperthermia- A numerical analysis [Volume 6, Issue 1, 2016, Pages 189-200]
Zare, J. Frequency Analysis of Vortex Shedding in Cascade of an Axial Compressor in Moderate Reynolds Numbers [Volume 6, Issue 1, 2016, Pages 19-27]
Zare, V. Numerical Analysis of Various Nanoparticles Size Effects on Thermal Performance of Nanofluid in A Microchannel Heat Sink [Volume 6, Issue 4, 2016, Pages 275-284]
Zare Mehrjardi, Mahdi Effects of design and lubrication parameters on thermo-hydrodynamic performance of noncircular three lobe journal bearings with micropolar lubricant [Volume 6, Issue 3, 2016, Pages 79-96]
Zoghi, M. Parametric analysis and optimization of a ground source heat pump with economizer [Volume 6, Issue 1, 2016, Pages 215-224]
Zolfaghari, A. R. Influence of air inlet diffuser layout on indoor air quality and occupants’ thermal comfort in a room with baseboard heating system [Volume 6, Issue 3, 2016, Pages 261-270]
Zolfaghari, A.R Analysis the influence of air outlet opening’s location in an industrial environment with high temperature radiant heaters on uniformity of thermal conditions and distribution of the contaminant in presence of asymmetric flow field [Volume 6, Issue 3, 2016, Pages 249-260]